News

  • Fastener Torque for Construction – Why Both Over-Tightening and Under-Tightening Fail

    Fastener Torque for Construction – Why Both Over-Tightening and Under-Tightening Fail

    There are two very different approaches to installing fasteners on a job site. In one case, the impact driver was run until the screw stopped turning, and then it was run for another half-second. Another guy tightens it until it “feels right” and moves on. “The one is over-tightening....
    Read More
  • Nylon vs All-Metal Lock Nuts: Anti-Vibration Fastening Selection Guide

    Nylon vs All-Metal Lock Nuts: Anti-Vibration Fastening Selection Guide

    Loosening of bolts caused by vibration has been a frequent threat in machinery manufacture, light steel structure building, automobile assembling, and industrial equipment running. The traditional standard hex nut is only locked by the friction of threads and it can be loosened off or fall off du...
    Read More
  • #3 vs #5 Drill Points: How to Select Self-Drilling Screws Based on Metal Sheet Thickness

    #3 vs #5 Drill Points: How to Select Self-Drilling Screws Based on Metal Sheet Thickness

    A majority of the onsite installation problems, such as drilling too slowly, not staying properly cool while breathing out, tip burning out, thread slipping or fastening too much speed or torque is not the cause of many of these issues. In many light steel framing or metal cladding works, these a...
    Read More
  • How to Avoid Thin Metal Cracking Caused by Self-Drilling Screws

    How to Avoid Thin Metal Cracking Caused by Self-Drilling Screws

    You can usually tell whether a self-drilling screw will crack a thin panel before you even pull the trigger. It is a simple calculation of speed, torque, and drill point size. Most cracked panels on site are not caused by faulty screws. They are caused by a mismatch between the screw’s spec...
    Read More
  • Can You Remove and Reuse Construction Screws Safely

    Can You Remove and Reuse Construction Screws Safely

    During home renovations, light-gauge steel construction, and the assembly of thin-walled metal components, issues such as screws becoming jammed, rusted fast, or seized are extremely common challenges. When performing maintenance and renovations, construction workers often face two major problems...
    Read More
  • Hex Socket Confirmat Screws vs Traditional Fasteners

    Hex Socket Confirmat Screws vs Traditional Fasteners

    The Old Way of Building Cabinets – And Why It Keeps Failing If you’ve ever built a kitchen cabinet or put together a piece of RTA furniture, you know the drill. You drill a hole, put in a wooden dowel, glue it, clamp it and wait. Or you have a cam lock – you know, those metal discs and bolts that...
    Read More
  • Fastener Lead Time Optimization – How to Plan Orders and Avoid Project Delays

    Fastener Lead Time Optimization – How to Plan Orders and Avoid Project Delays

    For construction contractors, hardware distributors, and project procurement managers, project delays caused by fastener delivery delays are often among the most frustrating and costly issues. Sudden production backlogs, poor timing of orders, disorganized collaboration among multiple suppliers, ...
    Read More
  • Concrete Screw vs Wedge Anchor – Which One Holds Better?

    Concrete Screw vs Wedge Anchor – Which One Holds Better?

    You have a concrete slab. You need to attach something to it. The question is always the same: what fastener should I use? Solid concrete, cinder blocks and brick all need secure fixing, yet concrete screws, wedge anchors and sleeve anchors perform totally differently under the same working condi...
    Read More
  • Rivet Nut & Blind Nut Guide for Hollow Metal Frames | Sinsun

    Rivet Nut & Blind Nut Guide for Hollow Metal Frames | Sinsun

    Rivet Nuts / Blind Nuts / Threaded Inserts for Hollow Metal Frames Industrial manufacturing, metal fabrication, and commercial assembly have always dealt with hollow metal frames and blindside applications. Weak threads, thin walls, and inaccessible back sides hinder traditional fastening methods...
    Read More
  • How to Prevent Fastener Failure by Selecting the Right Screws?

    How to Prevent Fastener Failure by Selecting the Right Screws?

    It is not accidental that fasteners fail. There are many reasons why screws are rusted, broken, or stripped—perhaps the coating is improperly chosen and cannot withstand the environment, perhaps the hardness is not sufficient for the load, or perhaps the thread design is not matched to the materi...
    Read More
  • Pros and Cons of Hand-Driven vs Powder-Actuated Fastener Installation– A Practical Guide for Construction Professionals

    Pros and Cons of Hand-Driven vs Powder-Actuated Fastener Installation– A Practical Guide for Construction Professionals

    Hand-driven and powder-actuated tool driving are two of the most common methods of installing fasteners on construction sites. Different types of screw and nails have distinct physical structures and performance characteristics. Using an inappropriate installation method will easily cause fastene...
    Read More
  • Choose Sinsun Fasteners to Avoid Loosening and Ensure Construction Safety

    Choose Sinsun Fasteners to Avoid Loosening and Ensure Construction Safety

    A deck board that was tight last summer now has a screw head sitting a quarter of an inch above the surface. A metal roof panel that didn’t leak before now has a missing screw – the rest are loose enough to spin with your fingers. A wood frame joint that was solid now wobbles. Fasteners don’t loo...
    Read More